skip to main text

WPS Connection

  1. Make sure the WPS button on the wireless router is ready to be pressed.

  2. Press and hold the printer's Network Type button (A) for about two seconds until the Wi-Fi lamp (B) lights up.

    figure: Press and hold the Network Type button and the Wi-Fi lamp lights up

  3. Check that the printer's ON lamp flashes quickly, and then press and hold the wireless router's WPS button within two minutes.

    Note

    • For more on pressing the WPS button, see the wireless router manual.

  4. Once connection to the wireless router is complete, the ON lamp stops flashing and stays lit.

    figure: ON lamp lights up

    If the Alarm lamp lights up, see "Troubleshooting."

    The network connection setup is now complete.